3dprinting:materials:pla
This is an old revision of the document!
Table of Contents
PLA
Starting Point
PLA settings vary by brand, formulation, printer, nozzle, and cooling. Use the spool label or manufacturer data sheet as the starting point.
| Setting | Tested value |
|---|---|
| Nozzle temperature | |
| Bed temperature | |
| Cooling | |
| Print speed | |
| Retraction | |
| Drying temperature / time |
Notes
Record brand, product line, color, nozzle, and slicer profile. Re-test after changing nozzle material or diameter.
3dprinting/materials/pla.1793802094.txt.gz · Last modified: by 127.0.0.1