This is an old revision of the document!
Table of Contents
PLA
Starting Point
PLA settings vary by brand, formulation, printer, nozzle, and cooling. Use the spool label or manufacturer data sheet as the starting point.
| Overture Basic PLA | |
|---|---|
| Setting | Tested value |
| Nozzle temperature | 215c |
| Bed temperature | 65c |
| Cooling | After 3rd Layer |
| Print speed | |
| Retraction | |
| Drying temperature / time | 6Hour / 55c |
Notes
Record brand, product line, color, nozzle, and slicer profile. Re-test after changing nozzle material or diameter.
02/03/2026
White PLA Filament:
I have always wondered why when I print in White, there are always little gaps near edges. At first I just thought that it happens with Black Filament too. I tested it and no it does not print exactly the same. I run Overture Filament only. Years ago I decided to stick with one type of Filament for PLA, PETG, a TPU. I run Calibration for each type material. From what I understand the additives in White that contains Titanium Dioxide. This makes if flow differently and may need to run a slightly higher Temperature.
More to follow later.