3dprinting:printers:ender5plus:calibration
Ender 5 Plus Calibration Log
| Date | Test | Before | After | Profile / notes |
|---|---|---|---|---|
| Bed leveling | ||||
| Z offset | ||||
| Extruder rotation distance / E-steps | ||||
| PID tuning | ||||
| Pressure advance | ||||
| Input shaping |
Calibration Order
- Confirm frame, gantry, belts, and motion are mechanically sound.
- Check bed tram / leveling and probe operation.
- Set Z offset and validate first layer.
- Calibrate extrusion using the installed firmware's recommended method.
- Tune temperature and cooling for each filament.
- Tune pressure advance / linear advance.
- Tune input shaping if supported.
- Save profiles with date, nozzle, filament, and firmware version.
3dprinting/printers/ender5plus/calibration.txt · Last modified: by 127.0.0.1