N5JLD dot NET

What I do in my Spare Time

User Tools

Site Tools


gladiator:start

This is an old revision of the document!


Jeep Gladiator (JT) — Home & Platform Overview

Work in Progress: This section of N5JLD dot NET is actively being expanded with technical reference guides, Mojave build notes, maintenance checklists, and wiring diagrams for the Jeep Gladiator (JT).

Introduced for the 2020 model year, the Jeep Gladiator (JT) is a body-on-frame, solid-axle midsize pickup truck built on a stretched Wrangler JL platform with a 137.3-inch wheelbase, heavy-duty Dana 44 front and rear axles, a 5-foot all-steel cargo bed, and fully removable doors and roof panels. It combines open-air 4×4 trail capability with midsize pickup hauling, towing, and overland build versatility.

1. Platform Architecture & Key Highlights

  • Body-on-Frame & Solid-Axle Design: Pairs a high-strength boxed steel ladder frame with five-link coil-spring front and rear suspension (utilizing rear coil-spring geometry derived from the Ram 1500 for payload and towing stability).
  • Standard Dana 44 AdvanTEK Axles: Every trim ships from the factory with heavy-duty M210 front and M220 rear Dana 44 axles, available in standard track (~66.5“ WMS) or wide-track (~68.0” WMS) configurations.
  • Open-Air Modularity: Shares the Wrangler JL's fold-down windshield, removable aluminum doors, and choice of Freedom Top 3-piece hardtop or Sunrider soft top.
  • Purpose-Built Flagship Trims:
    • Rubicon (Trail Rated): Built for technical rock crawling with a 4.0:1 Rock-Trac transfer case, front and rear Tru-Lok electronic lockers, and an electronic disconnecting front sway bar.
    • Mojave (Desert Rated): Built for high-speed sand and washboard trails with a 1-inch factory front lift, FOX 2.5-inch internal bypass reservoir shocks, FOX front hydraulic jounce bumpers, cast-iron front steering knuckles, a 2.72:1 Command-Trac transfer case, and a rear Tru-Lok locker operable at higher speeds in 4-High via Off-Road+.

2. Powertrain & Drivetrain Overview (2020–Present)

Powertrain / Option Model Years Output Transmission(s) Key Platform Notes
3.6L Pentastar V6 2020–Present 285 hp / 260 lb-ft 6-Speed Manual (2020–2023) or 8-Speed Auto (2020–Present) Core engine across all trims; 6-speed manual discontinued after 2023, making the 850RE 8-speed automatic standard on 2024+ models.
3.0L EcoDiesel V6 2021–2023 260 hp / 442 lb-ft 8-Speed Heavy-Duty Auto (8HP75) Offered on Sport, Overland, and Rubicon trims (not available on Mojave); discontinued after the 2023 Farout Edition.
4.10 Max Tow / Off-Road Axle Package 2020–Present — 8-Speed Auto (Max Tow) / Manual or Auto (Rubicon/Mojave) Unlocks up to 7,650–7,700 lbs towing on Sport S Max Tow and provides factory 4.10 gears + wide-track Dana 44s on Rubicon and Mojave.

3. Jeep Gladiator Knowledge Base Directory

Navigate directly to the technical guides, build notes, and checklists in the Jeep Gladiator section of [N5JLD dot NET](https://n5jld.net):

Vehicle Specs, Trims & Buying Guides

Drivetrain, Axles & Suspension

Cargo Bed, Open-Air Body & Overlanding

Electronics, Electrical & Mobile Comms

4. Quick Reference: Essential Fastener & Service Specs

Component / Task Tool / Socket Size Torque / Service Spec
Front & Rear Wheel Lug Nuts 22 mm socket 130 ft-lbs (176 Nm)
Door Hinge Pin Nuts T50 Torx Snug / hand-tight (or omit seasonally)
Door Check Arm Bolts & Hardtop Bolts T40 Torx Snug firmly (do not over-torque fiberglass top)
Front Track Bar Bolts (Frame & Axle) 21 mm socket/wrench 115–130 ft-lbs (torque with vehicle on ground)
Front Lower Control Arm Bolts 21 mm / 24 mm 190 ft-lbs (torque at normal ride height)
Engine Oil (3.6L Pentastar V6) 13 mm drain plug / 24 mm filter cap 5 quarts 0W-20 (API SP / MS-6395)

Navigation: N5JLD.net Home | Jeeps | Jeep Gladiator | Ham Radio | Electronics

gladiator/start.1795007200.txt.gz · Last modified: by Jon